山东豪沃橡塑有限公司
当前位置:供应信息分类 > 橡塑 > 工程塑料 > 其他工程塑料

豪沃 闸门用MGE滑块 耐磨工程塑料合金板

豪沃 闸门用MGE滑块 耐磨工程塑料合金板
  • 豪沃 闸门用MGE滑块 耐磨工程塑料合金板
  • 供应商:
    山东豪沃橡塑有限公司
  • 价格:
    15.00
  • 最小起订量:
    10千克
  • 地址:
    宁城街道
  • 手机:
    13406892509
  • 联系人:
    张经理 (请说在中科商务网上看到)
  • 产品编号:
    199084701
  • 更新时间:
    2023-02-27
  • 发布者IP:
  • 产品介绍
  • 用户评价(0)
产品参数
  • 豪沃
  • 工程
  • MGE板
  • 山东
  • 按需定制
  • MGE
  • 异形
  • 黑色
  • 纸箱
  • 定制
  • 物流
  • 橡塑
  • 中国
  • 山东豪沃橡塑有限公司
  • 耐磨,抗震
  • 通用级

详细说明

  MGE滑板的性能:

  1、具有良好的弹性和抗冲击性,能够较好地消除轨道不平造成的局部高压带来的各种危害;

  2、摩擦系数低、动静摩擦系数相差小,不会出现爬行现象,运行平稳;

  3、MGE滑移滑板自润滑免维护,即使在干摩擦条件下也可正常使用;

  4、承载能力大、抗震性能好,既能承受较大的冲击载荷,也能承受冲击载荷,在受到大的负荷时,具有很好的柔韧性和自恢复性;

  5、耐磨损、耐腐蚀,比磨损率为107mgNm,较其它非金属材料提高了一个数量级,使用寿命大大提高。在电场、化学场、力场及酸、碱、盐介质条件下不腐蚀、不溶胀;

  6、不剥落、抗剪能力强;

  7、吸水率极低、尺寸稳定性好。

  MGE板的用途:

  1.大型重载、有腐独不易加油或重大型水利工程项目的工况。如弧门支铰轴承,大载荷滑轮轴承、止推轴承、关节轴承、滑板、闸门滑块、人字门支撑轴承、水轮机导叶轴承等。

  2.用于一些大中型载荷的轴承、滑板或滑块、止推环等。

  3.用于坞门承压垫、MGE轴套桥墩防撞板、材料摩擦系数低,动静摩擦系数相近,可用于平移大型重物的滑板。

  4.用于钢丝绳铰轮、托辊、齿轮、定位轮、行走轮等。

  MGE skateboard performance:

  1. It has good elasticity and impact resistance, and can better eliminate various hazards caused by local high voltage caused by uneven track;

  2. Low friction coefficient, small difference between dynamic and static friction coefficient, no creeping phenomenon, stable operation;

  3. MGE sliding plate is self-lubricating and maintenance-free, and can be used normally even under dry friction conditions;

  4. With large bearing capacity and good seismic performance, it can bear both large impact load and impact load, and has good flexibility and self-recovery when subjected to large load;

  5. Wear-resistant and corrosion-resistant, the specific wear rate is 107mgNm, which is an order of magnitude higher than other non-metallic materials, and the service life is greatly improved. No corrosion and swelling under the conditions of electric field, chemical field, force field and acid, alkali and salt media;

  6. No peeling, strong shear resistance;

  7. Very low water absorption and good dimensional stability.

  Purpose of MGE board:

  1. Working conditions of large heavy-load, corrosive and difficult to refuel or major water conservancy projects. Such as radial gate hinge bearing, heavy load pulley bearing, thrust bearing, joint bearing, sliding plate, gate slide, miter gate support bearing, turbine guide vane bearing, etc.

  2. Bearing, sliding plate or sliding block, thrust ring, etc. for some large and medium loads.

  3. It is used for dock gate bearing pad, MGE shaft sleeve pier anti-collision plate, material friction coefficient is low, dynamic and static friction coefficient is similar, and it can be used for sliding plate for translating large heavy objects.

  4. It is used for steel wire rope reamer, idler, gear, positioning wheel, traveling wheel, etc.